Optimization of Process Parameters for Green Composites in Abrasive Water Jet Machining Process Using Neuro-Regression Analysis

Authors

  • Haydar Demirhan Author
  • Canan Hamurkarog Author

Keywords:

Abrasive water jet machining, green composite, neuro-regression, optimization

Abstract

This study aims to develop a design procedure for optimizing the abrasive water jet machining (AWJM) 
process in green composites. Multiple non-linear neuro-regression analysis has been performed methodically 
to overcome insufficient approaches to modeling-design-optimizing green composites in AWJM. First, the 
model generation process is carried out according to three criteria: linearity, order, and functions used in the  
model. Then, the machining parameters have been optimized by applying a numerical non-linear global 
optimization algorithm, Simulated Annealing. Pressure within the pumping system (Pw PS), stand-off distance 
(SoD), and nozzle speed (NS) are design variables; surface roughness (Ra) and process time (PT) are objective 
functions of introduced mathematical optimization problems. The numerical result shows that the optimum 
process parameters obtained are Pw PS (150 MPa), SoD (3.5 mm), and NS (125 mm/min). This novel 
optimization approach is also feasible for another modeling design optimization problem. The proposed design 
can be used as a systematic framework for parameter optimization in environmentally conscious manufacturing 
processes.

Downloads

Published

2026-06-29